{{results.messages.text}}
Returns Accepted: Returns Accepted Refund will be given as: Money back or exchange (buyer's choice) Item must be returned within: 30 Days Return policy details: *For orders placed during the holiday season from November 15th to December 31st, the return period is extended to 60 days. *If the return was caused by an error on our or a manufacturer's part, restocking and shipping fees do not apply...
{{results.messagesById['http://www.2040-parts.com/omix-ada-16745-07-99-04-jeep-grand-cherokee-front-driver-side-brake-caliper-i694282/']}}
Returns Accepted: Returns Accepted Refund will be given as: Money back or exchange (buyer's choice) Item must be returned within: 30 Days Return policy details: *For orders placed during the holiday season from November 15th to December 31st, the return period is extended to 60 days. *If the return was caused by an error on our or a manufacturer's part, restocking and shipping fees do not apply...
{{results.messagesById['http://www.2040-parts.com/omix-ada-16745-04-2005-jeep-liberty-passenger-side-brake-caliper-i694271/']}}
Returns Accepted: Returns Accepted Refund will be given as: Money back or exchange (buyer's choice) Item must be returned within: 30 Days Return policy details: *For orders placed during the holiday season from November 15th to December 31st, the return period is extended to 60 days. *If the return was caused by an error on our or a manufacturer's part, restocking and shipping fees do not apply...
{{results.messagesById['http://www.2040-parts.com/omix-ada-16719-22-1993-jeep-cherokee-brake-master-cylinder-i637368/']}}
This LED fixture is 18.25" long, 1/4" longer than the 18" fluorescent fixture it is replacing. It has a modern low profile look with the same 2.5" width and low profile 1.25" height, which makes it ideal for under-shelf use. The low lens gives it a sleek modern look. Black ends. There are 36 LEDs in this 12 volt fixture. The LED output is 315 - 1050 lumens (a comparable fluorescent version is o...
{{results.messagesById['https://www.racingjunk.com/Truck-SUV-Accessories/183103717/18-LED-Light-Fixtures-33-43-48-Avail.html']}}
I have two 350 CI chevys, used in pro lite off road race trucks. One engine has half a season on it (Less then 250 miles) the other is brand new never bolted in the truck. We are changing to fuel injection per the rules or we would continue running these engines. I want $10,000 for the used one and $20,000 for the new one. Take both for $25,000.. CUMMING, GA 30041 (951) 795-0052
{{results.messagesById['https://www.racingjunk.com/SBC-complete/183105791/Pro-Power-Racing-.html']}}
I have a few sets of Achilles slicks that I need to get rid of as I have so many that I will never use them all. They re unmounted, brand new with stickers still on them. They re about 2 years old but kept inside in airconditioned basement. Prices is half off retail.. DACULA, GA 30019 (404) 889-2723
{{results.messagesById['https://www.racingjunk.com/Road-Racing-Tires/183091685/Achilles-GS328-30-65-18-new.html']}}
Have 4 sets for sale. Kept in air conditioned basement, around 2 years old, I have too many sets and trying to make room for other spares.. DACULA, GA 30019 (404) 889-2723
{{results.messagesById['https://www.racingjunk.com/Road-Racing-Tires/183091687/New-Achilles-123s-285-35-18.html']}}
Have a Yukon Aluminum thru bolt Ford 9 inch third member with 5.14 gears 35 spline spool aluminum retainer 1350 billet yoke. Used for 10 passes in great condition.$1,100 plus shipping.. LOGANVILLE, GA 30052 (404) 732-6652
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/183114046/9-Aluminum-Third-member.html']}}
Selling my Bmw S14 2.0 engine, built by BMW motorsport. The engine is 100% original,I got the engine with the car when I bought it, before it was remove.. LAWRENCEVILLE, GA 30043 (678) 217-4699
{{results.messagesById['https://www.racingjunk.com/Other/183122452/Bmw-S14-2.0-engine.html']}}
1975 911S 2.7L. 1975 911S 2.7 engine. Rebuilt then stored for 30 years. Just went thru entire engine(2018). Cylinders re-nikasil plated, new rings, new exhaust. All work performed by a former engine builder for Vasek Polak and Bob Akin. Engine is fully rebuilt and has Dyno time only! Produced 179.7 hp and 168.5 ft lbs torque. Beautiful Engine. Ready to go. Contact for more info. Thanks. Flowery...
{{results.messagesById['https://www.racingjunk.com/Other/183118347/Porsche-Engine.html']}}
Engine Type V6 Displacement 4.2L Bore x Stroke 96 x 96mm (3.78 x 3.78in) Prop Shaft Horsepower 250hp at 5500 rpm Full Throttle RPM Range 5000 ~ 6000 rpm Alternator Output at W.O.T. 50 - 70 Amp Compression Ratio 10.3:1 Fuel Induction System EFI Weight* 250 kg (551 lbs) - 254 kg (562 lbs) Recommended Fuel Octane 87 Recommended Engine Oil Yamalube 4M Recommended Fuel Filtration Yamaha 10-Micron Fu...
{{results.messagesById['https://www.racingjunk.com/Other/183098784/Used-Yamaha-250HP-4-Stroke-Outboard-Motor-Engine.html']}}
Engine Type V6 Displacement 3.3L Bore x Stroke 94 x 80.5mm (3.70 x 3.17 in) Prop Shaft Horsepower 200hp at 5500 rpm Full Throttle RPM Range 5000 ~ 6000 rpm Alternator Output at W.O.T. 44 Amp Compression Ratio 9.9:1 Fuel Induction System EFI Weight* 276 kg (608 lb) Recommended Fuel Octane 87 Recommended Engine Oil Yamalube 4M Recommended Fuel Filtration Yamaha 10-Micron Fuel/Water Separating Fil...
{{results.messagesById['https://www.racingjunk.com/Other/183098786/Used-Yamaha-200HP-4-Stroke-Outboard-Motor-Engine.html']}}
Tall head Esslinger with 6 races since complete rebuild. Block repaired at RayPro; line honed and decked. New crank, Callie s Rods, JE pistons and Total Seal rings. New exhaust valves and seats, rocker arms, rocker pivots and springs/retainers. Rebuilt fuel pump/PS pump by KSE. Rebuilt Barnes oil pump. Comes complete with MSD ignition and coil, air filter, header, u joint, and by-passes. 2 time...
{{results.messagesById['https://www.racingjunk.com/Other/183099868/Esslinger-XT-Midget-engine.html']}}
2 Aluminum Racing Seats. 18" wide at bottom and 37" high from bottom to top of back. Unused good condition.. These are in Rockledge,FL and can be shipped with buyer paying shipping; Or local pick-up.. Snellville, GA 30039 (770) 736-1128
{{results.messagesById['https://www.racingjunk.com/Interior/183092672/Aluminum-Racing-Seats.html']}}
SST Motorsports now how has Lightweight Composite Air Helmets,far Superior to any other brands and price competitive. Aerodynamic modeling controls airflow around the helmet for stability while the extended duck bill captures downward airflow to reduce helmet lift and buffeting Provides cooling and fog free ventilation with integrated crown and chin bar vents. SST Motorsports has Helmets in sto...
{{results.messagesById['https://www.racingjunk.com/Helmets/182806790/Lightweight-Composite-Air-Auto-Racing-Helmets-.html']}}
SST Motorsports now how has Lightweight Carbon Fiber helmets,compare our Carbon Composite features and competitive pricing! Aerodynamic modeling controls airflow around the helmet for stability while the extended duck bill captures downward airflow to reduce helmet lift and buffeting Provides cooling and fog free ventilation with integrated crown and chin bar vents. Advanced lightweight Carbon ...
{{results.messagesById['https://www.racingjunk.com/Helmets/182806793/Carbon-Fiber-Snell-2015-Helmets-SST-Motorsports.html']}}
SST Motorsports now has Light weight composite helmets available in stock ready to ship! Our new helmet comes in White,Flat Black,Carbon Fiber and Carbon Fiber Graphics,Gloss Black Our Carbon Fiber Graphic helmet looks just like Carbon Fiber,most cant tell it from our real Carbon Fiber Helmets *ADVANCED LIGHTWEIGHT CARBON AND COMPOSITE SHELLS *SHELL DESIGN TO PREVENT BUFFETING WITH DUCK BILL AL...
{{results.messagesById['https://www.racingjunk.com/Helmets/182857904/Flat-Black-Lightweight-Composite-Auto-Racing-Helmets-.html']}}
SST Motorsports now how has Lightweight Composite helmets,far Superior to any other brands and price competitive. Aerodynamic modeling controls airflow around the helmet for stability while the extended duck bill captures downward airflow to reduce helmet lift and buffeting Provides cooling and fog free ventilation with integrated crown and chin bar vents. SST Motorsports has Helmets in stock r...
{{results.messagesById['https://www.racingjunk.com/Helmets/182857920/SALE-Snell-2015-Helmet-w-Necksgen-H-N-Restraint.html']}}
SST Motorsports now has Light weight composite AIR helmets available in stock ready to ship! Our new AIR helmet comes in White,Flat Black,Carbon Fiber *AIR INTAKE AND CHANNEL DESIGNED FOR MAXIMUM COOLING *ADVANCED LIGHTWEIGHT CARBON AND COMPOSITE SHELLS *SHELL DESIGN TO PREVENT BUFFETING WITH DUCK BILL ALSO *EXCEEDS SNELL SA2015 & FIA 8859-2015 RATING *COMFORTABLE,REMOVABLE & ADJUSTABLE FR NOME...
{{results.messagesById['https://www.racingjunk.com/Helmets/182857922/SALE-Snell-2015-Lightweight-Composite-Air-Helmets.html']}}
11-Nov-2018Monroe, GA+18 milesAuto Parts for Sale
Complete set of four 14 x 6 real Western Wheels from the 70 s/80 s. Beetle they came from was last registered or driven in 1985. WESTERN WHEEL is cast into back side. No road rash or curb rash, no hits or bends on any of them. Weights were on back side so no rim scratches either. Light pitting here and there makes a nice patina, or polish and restore like new, your choice. No adapters necessary...
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=2227449']}}
Post Ad